When selecting the vortex air pump and the gas ring
vacuum pump, the parameters are mainly selected, but there are still some small details that need to be mainly! This decides whether the vortex pump or air ring vacuum pump you choose is suitable for your equipment and environment! There are a few points to note:
1. When selecting the vortex air pump and the air ring vacuum pump, consider the flat washers and spring washers that must be used during installation to tighten the screws;
2, choose to use rubber buffer rubber to withstand the weight of the vortex air pump, gas ring vacuum pump, especially high-power vortex air pump, gas ring vacuum pump, essential;
3. If you have a requirement for noise, you can add a silencer to reduce the noise (generally about 5dB), and the silencer is installed at the end of the air inlet duct or the air duct;
4. For some occasions where the noise is very high, according to the conditions of the machine itself, plus a layer of silencer, it can meet the noise requirements of the site. For details, please consult the manufacturer of the vortex pump.
5. When using silencer cotton silencer, pay attention to the distance between the vortex air pump and the gas ring vacuum pump and the tank. Pay attention to the ventilation and heat dissipation of the cyclone vortex pump and the gas ring vacuum pump. Pay attention to the rubber buffer rubber to withstand the vortex air pump and the air ring. The weight of the vacuum pump can be installed and debugged under the guidance of the manufacturer.
6. The inlet and outlet of the gas ring vacuum pump should be connected by a hose to isolate the vibration.
These details can help you avoid many small problems. The selection of vortex air pump and air ring vacuum pump is not so simple, but there are many professional factories that will remind you and solve these problems, so choose one. It is also very important to rely on professional air pump manufacturers, which can save a lot of cumbersome things!
Professional vortex air pump, gas ring vacuum pump manufacturer, the first Zhejiang Geling Industrial Co., Ltd., as the leader of the vortex air pump, gas ring vacuum pump industry, Ge Ling not only has a complete customer program, but also a professional technical team, from the model Matching to installation and commissioning as well as after-sales maintenance, there are special instructions. Buyers can save a lot of unnecessary trouble.
