As a vacuum power source, the high-pressure fan generates vacuum, which causes the material to enter the cyclone separator with the suction pipe and fall into the hopper for feeding. The air is filtered through the filter and discharged from the exhaust outlet of the fan.
Matters needing attention in the use of fans
1. The fan must install the filter and clean the foreign matter in the filter in time to prevent the blockage of the filter from affecting the feeding.
2. Proper pressure relief valves should be installed during the use of fans to prevent blockage of filters and pipes from overloading the fans.
3. Suitable pipes should be installed. Do not shrink the pipes by more than two-thirds. It is better to install pipes with fan inlet and outlet or enlargement level 1.
4. In the process of using the fan, attention should be paid to the heat dissipation and ventilation of the fan.
5. After the customer installs the fan, the customer is required to measure whether the fan running current is within the rated current.
Common Question Data of Suction Machine Industry
What material is conveyed? What's the specific gravity? What is the granularity of the material?
What is the height of the conveyor? How many meters is the farthest transported horizontally?
How many elbows are there in the height direction and the horizontal direction?
What is the inner diameter of the main pipe? What kind of pipe is used?
What's the temperature at the site? What is the installation space of the fan?
What's the conveying capacity, please? (How many tons per hour)
When the selected pressure is close to the rated pressure of the fan, the pressure relief valve must be installed.
