The same is true for important equipment such as
air blower, so its abnormalities can not be taken lightly, if not solved in time, the problem will become more and more serious.
If carefully observed, there are still many abnormal performances on the air blower, such as the following two situations: First, the bad phenomena on the bearing of the air blower, including high temperature, turn cap, distortion, angle error and so on, may lead to abnormal bearing. So once a similar situation is found, the best way to deal with it is to use spherical roller bearings which can automatically adjust the center of gravity to avoid problems. Secondly, in addition to the above mentioned phenomena, there is also a very difficult phenomenon to find, that is, the bearing clearance does not meet the requirements. Because the clearance inside the bearing is very important to the bearing tightness, when the clearance of most bearings decreases gradually with the increase of temperature, it will cause the heat generated by the bearing to be greater than the heat dissipated, thus causing a series of serious consequences. The two situations mentioned above must be paid more attention to. The failure rate of air blower depends on the degree of attention paid to these situations.
For more information, please visit our official website: http://www.dereike.com./
