Analysis of foreign body dust inhaled by side channel blowers
In the use of side channel blowers, there are always some large and small fan failures, among which one of the most usual is the use of side channel blowers, accidentally into the foreign body, particularly for the first time clients, Because of the concept of side channel blowers and using needs do not comprehend, hence creating a series of troubles, such as side channel blowers electric motor international body where the foreign body into? Why will certainly the inhalation of foreign matter in the impeller create the electric motor to melt and more.
Today, Dereike will offer you a detailed explanation of these issues.
Here there are two cases: one is the electric motor into the foreign body, and also there is the follower pump body right into the international body, will certainly cause different results. In addition, we additionally require to have a concept of international bodies, such as screws and all kinds of little steel pieces have to be counted as foreign bodies, however some large bit things also count, such as the central suction system when the purification system is refrained well, there will be a lot of dirt will be sucked right into the pump body, triggering severe consequences, simple is the card device, severe will result in impeller damages, and also the whole maker scrap.
There are foreign bodies in the electric motor, which will cause the electric motor to burn off. Although the motor is insulated, the electric motor will suck the international bodies to the coil after electrify, as well as the international bodies will certainly jump as well as rubbing, and the enameled cable paint will be gotten rid of or harmed, which will result in the stator coil short-circuit burning. So where did these international objects get in? One of the most likely leakage is with the hole at the junction box of the electric motor, and there's nothing else way in. As well as side channel blowers pump body has a foreign body, will certainly make the impeller rubbing to the pump body, pump body (suction international body or contortion, processing is not good), birthing damages, and will be accompanied by noise, influence making use of Hank side channel blowers, significant as a result of foreign body as well as wind high speed rubbing, The pump body will be struck through the sensation, is the side channel blowers have to overhaul, these are the pump body inside the foreign body card equipment, is likewise usual. There is also an unusual circumstance, that is, the foreign body in the side channel blowers pump body is as well big, which directly leads to the impeller stuck, the motor overload procedure, the present is as well big, the electric motor temperature level ends up being high, bring about the motor melt.
But these circumstances can be stayed clear of, as long as we are careful when mounting, using and also maintaining, and also do a little better filtration steps, the issue is not big, primarily the follower will certainly be able to help a long time without failure.
