How to solve the high temperature when the side channel blower works?
2023-02-07 14:34
How to solve the high temperature when the side channel blowers works?
According to the client website design atmosphere fan choice:
If there is no moving air in the securing workshop above 80 ℃ on website, customers must pick high temperature resistant fan.
If there is no sealed workshop listed below 90 ℃ on site, air blood circulation consumers can choose regular temperature follower.
Please get in touch with the fan sales team before purchase according to the problems to pick the best fan typical high temperature follower resistance 200 ℃, special high temperature fan resistance 350 ℃ demand to be customized.
The bearing temperature level of side channel blowers goes beyond the requirement, which is just one of the essential aspects triggering the bearing damages. The primary factors for the side channel blowers temperature are as follows:
(1) Poor lubrication top quality. The objective of lubrication is to develop rubbing between solid and also liquid without direct get in touch with between static and fixed components. If the quantity of lubrication wants or the quality is poor, the dynamic and static parts will straight rubbing heating, or the heat can not be eliminated by lubrication, as well as the temperature of the side channel blowers birthing will certainly climb. (2) Poor setting up quality of moving bearings. If the inner sleeve as well as the shaft are not tight enough, the clearance in between the jacket and the bearing seat is also large or too little. (3) the securing felt is too limited as well as warm. (4) Side channel blowers bearing resonance is too big and bear impact lots, which seriously affects the security of lubrication movie. (5) The cooling water of the side channel blowers birthing is insufficient or disturbed, which influences the heat out, and the bearing temperature level rises. (6) Side channel blowers birthing top quality is poor. Sliding birthing scuffing high quality is poor, Ujin contact is bad or aborted; Rolling bearing rolling surface area fractures, fragmentation, peeling, etc, will break the security and harmony of the oil film, surface warmth bearing.
